Select Page

X-WAM

The X-WAM has superior contour-following abilities based on the unique combination of individually floating decks and articulated axis.

The ultimate in wide area mowing, when quality counts.

With the potential to cut 32 acres per hour and the ability to perform zero-turns without having to lift any of the mower decks, the X-WAM will increase your productivity and efficiency using only one tractor, one driver, and one mower.

The X-WAM has superior contour-following abilities based on the unique combination of individually floating decks and articulated axis. Our robust design coupled with our experienced service and support network ensures minimum downtime and increased productivity.

Talk to us today about the capabilities of X-WAM in your environment.

X-WAM Features.

The below features come as standard on all X-WAM mowers:

LocTEK

LOCTEK ROLLER BEARING RETENTION SYSTEM

A stubless roller retention system for vastly improved alignment, bearing life and replacement ease.

3 Year Warranty

LOW MAINTENANCE

All moving surfaces have long life synthetic bushes, or greasable bearings and remote grease points.

3 Year Warranty

FULL HYDRAULIC OPERATION

The X-WAM uses full hydraulic operation for deck retraction into road transport mode.

3 Year Warranty

ULTIMATE CONTOUR-FOLLOWING

Contour-following is compromised when decks are over 10′ wide. The X-WAM features multiple smaller decks for superior cut quality.

LazerBladez

LAZERBLADEZ

Achieves a superior cut and finish and are more cost efficient than cylinder reels or solid blade beams.

LazerBladez

RAPIDSET HEIGHT ADJUSTMENT

Clearly displayed cut height indicators allow for simple and easy alteration or resetting of cut heights.

LazerBladez

STEADFAST SPINDLES

With no spindle greasing required maintenance is extremely low and productivity enhanced.

3 Year Warranty

WHEELS RUN ON CUT GRASS

The rear deck is located between the transport wheels so grass is not flattened prior to mowing.

3 Year Warranty

3 YEAR WARRANTY

We build mowers that last and they’re supported with a 3 year industry leading warranty.

3 Year Warranty

TURF TIRE

Trimax turf tires help distribute the weight of the mower for less ground disturbance.

X-WAM Options.

Features Icons_Quattro

QUATTRO BLADE SYSTEM

This system adds 2 more blades to each spindle (2 flat & 2 upturned) for a finer cut on warm season grasses.

Features Icons_Anti Bounce Skids

ANTI-BOUNCE SKIDS

Ideal for high speed mowing, the Anti-Bounce Skids reduce the scalping effect when mowing on turf which is not smooth. Helps to ease the mower over humps between the front and rear rollers.

Features Icons_Galvanized

GALVANIZED

Hot-Dip Galvanizing provides added protection against corrosion in coastal environments with high salt concentrations and applications with high fertilizer usage.

Features Icons_Roller Scrapers

ROLLER SCRAPERS

Trimax Helical Scrapers operate with reduced tension but apply a constant pressure across the roller to assist with the cleaning of debris

SPECIFICATIONS.

Cutting Width 34′ 2″No. of Blade Spindles19
Overall Width34′ 6″Approx Weight10,758 lbs (5.38 ton)
Width (transport mode)9′Minimum PTO Output100 hp
Overall Length19′ 1″Warranty (Years)3
Cut Height Range⅜”-4½”

Download our
catalog.

Click here to download our digital PDF product catalog.

Book a free
Demonstration.

Interested in seeing a Trimax mower in action in your application? View the performance and benefits first-hand.

Buy genuine
Trimax Parts.

Visit our online Trimax Parts Store to purchase genuine parts, delivered direct to your door.

SNAKE MULCH KIT

Save on purchasing dedicated leaf blowing and collection units with the Snake Mulch Kit. Retrofittable to existing Snake S1 & S2 models.

SAFETY TESTED

The Vulcan complies with agricultural standard ISO4254 for protection against thrown objects, blade impacts, blade unbalance and more.

 

EASILY TRANSPORTABLE

Compacts to 8′ wide for easy transport from farm to farm (refer to local road regulations).

 

QUICK AND EASY HEIGHT ADJUSTMENT

Spacer rings are used to set the height and ergonomically designed handles make it simple for a one-person change in under 15 minutes.

 

GALVANIZED

Provides added protection against corrosion in coastal environments with high salt concentrations or high fertilizer usage.

 

PUNCTURE PROOF SOLID TIRES

These solid closed cell, airless formulated tires do not absorb water allowing superior rolling performance, durability, and no punctures.

 

SUSPENSION

The Pegasus is fitted with a Duratorque Suspension System capable of highway speeds.

 

ROAD TRANSPORTABLE

Equipped with a roadworthy chassis and capable of being towed at highway speeds.

 

WEAR RESISTANT SKIDS

Trailing skids made from abrasion-resistant steel extends bearing life and enables productivity in challenging environments.

 

FRONT CASTER WHEELS

Front semi-pneumatic caster wheels allow the FlailDek FX to follow ground contours independently from the tractor.

 

SAFE CLIPPING DISPERSION

Safety is paramount when mowing in public areas. The FlailDek FX expels debris in a downward direction behind the mower.

 

TURF TIRE

Trimax turf tires help distribute the weight of the mower for less ground disturbance.

 

WHEELS RUN ON CUT GRASS

As the rear deck is located between the rear transport wheels, grass is not flattened by the wheels prior to mowing, a feature unique to Trimax.

 

ULTIMATE CONTOUR-FOLLOWING

Contour-following and cut quality is compromised when decks are over 9′ 10″ wide. The X-WAM features multiple smaller decks for superior cut quality.

 

FULL HYDRAULIC OPERATION

The X-WAM uses full hydraulic operation for deck retraction into road transport mode.

 

LOW MAINTENANCE

All moving surfaces have long life synthetic bushes, or greasable bearings and remote grease points for hassle-free maintenance.

 

ROADSIDE ROLLER

Comes with a standard heavy duty roller, with 1/2″ wall thickness. Suitable for more demanding applications such as roadsides.

 

LOW MAINTENANCE

SteadFast Sealed Spindles have eliminated the tedious task of regular greasing. Snake now also features maintenance free pivot bushes.

 

RAPIDSET HEIGHT ADJUSTMENT

Clearly displayed cut height indicators allow for simple and easy alteration or resetting of cut heights. You can adjust heights without having to raise and lower the wings.

HIGH SPINDLE SPEEDS

The Trimax Topper has more spindles than comparison shaft driven toppers. These also spin at higher spindle speeds with shorter blade beams. This results in significantly more cuts per forward meter of travel and a much finer clip.

 

LOCTEK ROLLER BEARING RETENTION SYSTEM

A patent pending stubless roller bearing system for vastly improved retention, bearing life and replacement ease.

 

REPLACEABLE SKIDS

Skids on Warlord trailing arms prolong mower life in demanding terrain. The skids can be moved and replaced when required.

 

ANTI BLOCK SYSTEM

Topper spindles are fitted with a unique anti-block mechanism which deters long grass from catching and binding around the spindle restricting movement.

 

IMPROVES FEED QUALITY

Topping can be used to control poor quality pasture components such as removal of seed-heads and thistles and prevent their reoccurance.

 

ADVANCED DESIGN

Topper is short front to rear and mounts close to the tractor; allowing the use of smaller tractors. The high underbody clearance and open deck design allows for good flow of grass into the mowing deck and a clean ejection of cut grass.

 

LOW MAINTENANCE

With only 4 carefully positioned grease points and robust spindles with sealed ball bearings, the Trimax Striker has incredibly low maintenance requirements.

 

SAFETY

Striker exceeds international safety standards and is backed up by our meticulous testing and support network. Striker is a mower that can be used with confidence even when mowing in confined areas.

 

ADVANCED DESIGN

Striker incorporates decades of experience with multi-spindled rotary roller mowers. Designed to complement compact tractors, Striker retains the attention to detail that minimizes downtime and makes servicing easy. The cutting system, body integrity and sealed ball bearing spindles have been proven with extensive and rigorous testing.

 

REDUCED MAINTENANCE

We’ve eliminated the need to grease the pivot points and our updated spindle technology requires less maintenance and offers greater simplicity. You can spend more time mowing and less time maintaining!

 

EASY TO CLEAN

The improved belt chamber design includes front openings, allowing grass to be easily washed or blown out.

 

ACCURATE SPINDLE SETTING TECHNOLOGY

Trimax’s unique and protected spindle technology ensures spindle height is perfectly aligned across the length of each deck, providing the most accurate and consistent cut in the market.

 

LOW MAINTENANCE

To ensure optimum efficiency we’ve reduced the number of grease points by 15%, giving you 35% less maintenance costs than the Trimax Pegasus S3.

 

3 YEAR WARRANTY

We build mowers that last and they’re supported with a 3 year industry leading warranty. Our robust design, coupled with our experienced service and support network, ensures minimum downtime and maximum productivity.

 

SAFE CLIPPING DISPERSION

Safety is paramount when mowing in public areas. This is why Trimax has designed the Ezeemow FX to expel debris in a downward direction behind the mower.

 

STEADFAST SPINDLES

Somewhat of an operators dream, these spindles offer extremely low maintenance and remove the regular task of regular greasing. As such, costs are reduced and productivity is enhanced.

 

DISCHARGE CONTROL

Coarseness of mulch is controlled by the height of the rear flap. The finest mulch is produced with the flap in the lowest position, this low dispersion also improves safety in public spaces. Lifting the flap fully open while servicing provides uninhibited access to flails and rotor.

HYDRAULIC SIDE SHIFT

The Warlord S3 can be positioned directly behind the tractor or quickly offset by up to 19″. This feature assists with transport and maneuvering around obstacles.

PRUNING GUIDE

Helps direct prunings and other foliage into the front aperture of the mower, which would otherwise be too high or wide. It also helps keep debris away from the hydraulic system for protection in challenging environments.

INTERNAL LINER

A 1/4″ replaceable internal liner reduces noise and minimizes outer body damage prolonging mower life.

MOST VERSATILE STEALTH

The improved cutting chamber and baffle design directs airflow from the blades out and over the rear roller. This improves cut quality and spread in both long and short grass.

 

QUICKLIFT TEMPORARY DECK LIFT

Enables all three mower decks to be raised without disengaging the PTO to traverse driveways, paths and curbs.

 

AUTOMATIC BELT TENSIONERS

Eliminate the need for belt adjustments and improve drive to the spindles blades.

ZERO TURN

Allows continuous cutting while turning sharply for maximum productivity.

 

ARTICULATION ABILITY

With three articulating decks the Snake has the ability to follow contours with minimal scalping.

EASY HEIGHT ADJUSTMENT

Clearly displayed stainless steel height indicators allow for the easy adjustment of cut heights without having to raise or lower the wings.

FULL WIDTH ROLLERS

A large diameter rear roller on the ProCut follows the contours and supports the mower across its entire width, providing excellent anti-scalp protection.

STAND ON COVERS

Provides safe and easy access to the rear of the tractor when coupling the mower.

 

BELT CAVITY DUAL WASH FLAPS

Provides easy access for removal of grass and drainage of water from belt cavity.

FULL WIDTH ROLLERS

Full width rollers on all decks follow the contours of the ground and provide excellent anti-scalp protection. Rollers also allow mowing along the edge of banks or paths, and produces a superb striping effect for those wishing to pattern their turf. Safety is enhanced as rollers contain debris in the cutting chamber.

RAPIDSET HEIGHT ADJUSTMENT

Clearly displayed cut height indicators allow for simple and easy alteration or resetting of cut heights.

LAZERBLADEZ

With their unique ’tilt forward’ design, carefully engineered center of gravity and optimized blade thickness, LazerBladez achieve a superior cut and finish. They’re also cost efficient compared to reels or solid blade beams as only the fling-tip requires replacement.

 

REAR ROLLER

Full width rear roller prevents scalping, permits the edge of the mower to be run along curbs, adds to overall safety and produces striping.

 

NEW IMPROVED ROTOR

Designed to withstand the toughest environments our new rotor is more durable ensuring downtime is kept to an absolute minimum.

 

UNIQUE CONVERTER

When in a downward position the converter creates suction, which lifts grass for a superb cut. For work in heavy grass, lift converter for increased grass intake.

 

LOCTEK ROLLER BEARING RETENTION SYSTEM

A stubless roller bearing system for vastly improved roller retention, roller alignment, increased bearing life and minimal maintenance. Includes our new increased strength tri-bolt bearing housing.

 

Trimax Snake Demo Video UK from Trimax Mowing Systems on Vimeo.

POWER SAVING FLAILS

With their aerodynamic profile our strong forged steel flails reduce hp requirements, yet generate sufficient updraft for a clean cut.

 

Subscribe to our mailing list

* indicates required

Select your Industry